DSpace Collection:
https://er.chdtu.edu.ua/handle/ChSTU/1879
2023-11-21T05:14:49ZМетод експертної оцінки контролю якості продукції на підприємствах машинобудівної галузі
https://er.chdtu.edu.ua/handle/ChSTU/1896
Title: Метод експертної оцінки контролю якості продукції на підприємствах машинобудівної галузі
Authors: Різник, О. О.; Єфіменко, Н. А.
Abstract: У статті запропоновано підходи до моделювання процесу контролю якості продукції
на підприємствах машинобудівної галузі з метою оптимізації його результативності. Отримані
результати дають можливість визначити профілі та тенденції стосовно якості продукції машинобудування, виявити пріоритети поліпшення її якості. Машинобудівному підприємству необхідно проводити моніторинг щодо задоволення споживачів, визначивши способи одержання
цієї інформації, вчасно розробляти методи оцінювання та проводити аналіз отриманої інформації з метою задоволення потреб споживачів. Моделювання дає змогу вчасно виявити виникнення кризових явищ для кваліметричного оцінювання контролю якості виготовлення продукції
машинобудівної галузі, відстежувати динаміку і тенденції змін, що відбуваються.; This article proposes modeling of the process of product quality control efficiency at machinebuilding enterprises. The obtained results allow to determine the profiles and trends regarding the
quality of machine-building products, to identify priorities for improving product quality. Each machine-building enterprise needs to monitor customer satisfaction by identifying ways to obtain this
information, develop evaluation methods in a timely manner and analyze the information obtained
in order to meet the needs of consumers of machine-building products.
Modeling can diagnose the emergence of the crisis to assess qualimetric quality control manufacturing machinery products, trace trends and changes taking place.
The problem of quality is now one of the most pressing worldwide, and the interest in it is growing steadily. This is due to the fact that product quality determines market priorities, economic security of the state; largely ensures the sustainable development of civilization, preservation of the environment, human health and well-being
In most countries of the world, on different continents, quality improvement has become a national idea as a result of great efforts of governments, management of firms and companies aimed
at ensuring high quality products, services and works, processes.
Ukrainian mechanical engineering is still lagging behind in the use of modern methods of control system. At the present stage of development of the economy of Ukraine, an important condition for
the successful operation of the machine-building enterprise is the production of high quality products,
which helps to increase its competitiveness in domestic and foreign markets.
Quality assessment is not only the main and initial stage of a complex process of quality management of objects. Without knowledge of the level of properties and quality of the considered objects,
there is no possibility for scientifically substantiated acceptance of the necessary administrative decision and the further influence on an object for the purpose of change of quality. Today there is a need
to introduce a qualimetric assessment of quality control of machine-building products on the scale of the machine-building enterprise on the basis of the standard ISO 9001:2015. The effectiveness
of management in machine-building enterprises should be based on a comprehensive approach to interdependence and interaction of technical processes. Control based on the introduction of qualimetric assessment of quality control of machine-building products involves the interaction of units of the
machine-building enterprise, the ultimate goal of which is a high level of quality of the production
process in a timely manner. Assessment of the quality of machine-building products involves determining the following levels of quality: the absolute level of quality of choice – found by calculating the
selected indicators for its measurement without comparing them with the corresponding indicators
of similar manufacturers; relative level of quality of machine-building products – provides comparison of its indicators with absolute indicators of quality of the best similar domestic and foreign samples of products; promising level – involves assessing the quality of products taking into account the
priority areas and rates of development of science and technology; optimal level of quality – the level
at which the total public costs of production and use of machine-building products under certain conditions of consumption would be minimal.
On the basis of the process approach there is a need to build a hierarchical model of qualimetric assessment of quality control of manufacturing products. According to the author, scientific and
practical interest is the expansion of the methodological approach to the actions of the stages, in particular the measurement and planning of process indicators, as well as process monitoring.
Qualimetric assessment of quality control of machine-building products is based on the use
of a local system of indicators of the internal production process, in particular: the performance indicator – achieving the planned result of the level of quality of final products, taking into account risks;
the efficiency indicator – the cost (costs associated with the implementation of modern methods
of process quality control) and time spent on the process.
In addition, the flexibility indicator can be used as an additional characteristic of the further
development of the process, able to determine the impact of the process on the environment, potential
risks to staff, etc.2020-01-01T00:00:00ZПрименение электрошлаковой наплавки для изготовления молотков ударного механизма встряхивания осадительных электродов электрофильтров
https://er.chdtu.edu.ua/handle/ChSTU/1895
Title: Применение электрошлаковой наплавки для изготовления молотков ударного механизма встряхивания осадительных электродов электрофильтров
Authors: Билоник, И. М.; Береговенко, Н. Н.; Капустян, А. Е.; Шумилов, А. А.; Билоник, Д. И.; Губар, Євген Якович
Abstract: В статье представлены основные данные по технологическим возможностям производства деталей для ударного механизма встряхивания осадительных электродов электрофильтров. Предложена и аналитически обоснована перспективность изменения технологического
процесса изготовления молотка ударного механизма с целью максимального увеличения коэффициента полезного действия электрофильтра при увеличении эксплуатационной надежности молотков и снижении их стоимости. Установлено, что процесс изготовления молотка
практически можно свести к одной операции – электрошлаковой наплавке ударной части на
хвостовик. При этом для исходных заготовок (хвостовик и расходный электрод) применяются
стандартные стали стандартного сортамента. В результате исследования качества металла наплавленной ударной части молотка установлено, что процесс электрошлаковой наплавки
обеспечивает формирование монолитной и бездефектной структуры; микроструктура наплавленного металла – феррито-перлитная, достаточно однородная и дисперсная, что характерно для литого металла в водоохлаждаемом кристаллизаторе. Ударные испытания
молотков, полученных с использованием электрошлаковой наплавки, проводили на специально
разработанном ударном стенде, который обеспечивает энерго-кинематические параметры
удара молотка по балке встряхивания, аналогичные промышленному электрофильтру. Испытания, которые соответствовали продолжительности эксплуатации электрофильтра до
полного цикла, показали их высокую надежность (разрушений не было) и тем самым подтвердили возможность их промышленного применения. Рассчитанный ожидаемый экономический
эффект от применения технологии электрошлаковой наплавки при изготовлении молотков
ударного механизма встряхивания относительно разработанной конструкции молотка составил около 350–400 грн за штуку. Полученные в работе результаты могут быть использованы
на производстве, при проектировании технологических процессов изготовления деталей,
имеющих сложный технологический процесс изготовления.; У статті представлено основні дані про технологічні можливості виготовлення деталей
для ударного механізму струшування осаджувальних електродів електрофільтрів. Запропоновано й аналітично обґрунтовано перспективність зміни технологічного процесу виготовлення молотка ударного механізму з метою максимального збільшення коефіцієнта корисної дії електрофільтру при одночасному збільшенні експлуатаційної надійності молотків і зниженні вартості їх виробництва. Встановлено, що процес виготовлення молотка практично можна звести
до однієї операції – електрошлакового наплавлення. Водночас для вихідних заготовок (хвостовик і витратний електрод) застосовуються стандартні стали стандартного сортаменту.
В результаті дослідження якості металу наплавленої ударної частини молотка встановлено,
що процес електрошлакового наплавлення забезпечує формування монолітної і бездефектної
структури; мікроструктура наплавленого металу – ферито-перлітна, досить однорідна і дисперсна, що характерно для литого металу в водоохолоджуваному кристалізаторі. Ударні
випробування молотків, отриманих з використанням електрошлакового наплавлення, проводили на спеціальному ударному стенді, який забезпечує енерго-кінематичні параметри удару
молотка по балці струшування, аналогічні промисловому електрофільтру. Випробування показали їх високу надійність (руйнувань не було) і тим самим підтвердили можливість їх промислового застосування. Розрахований очікуваний економічний ефект від застосування технології
електрошлакового наплавлення при виготовленні молотків ударного механізму струшування
стосовно розробленої конструкції молотка становив близько 350–400 грн за штуку. Отримані
в роботі результати можуть бути використані на виробництві, при проектуванні технологічних процесів виготовлення деталей, що мають складний технологічний процес виготовлення.; The article presents the basic data on technological capabilities of the production of parts for
the shocking mechanism of shaking the precipitating electrodes of electrostatic precipitators. The
prospect of changing the manufacturing process of the hammer of impact mechanism in order
to maximize the efficiency of electrostatic precipitator while simultaneously increasing the operational
reliability of hammers and reducing the cost of their production is proposed and analytically substantiated. It is established that the process of making a hammer can be practically reduced to one operation – electroslag surfacing. In this case, for original workpieces (a shank and consumable electrode),
standard steels of a standard assortment are used. As a result of studying the quality of metal of the
welded shock part of a hammer it is established that the process of electroslag surfacing provides the
formation of monolithic and defect-free structure; the microstructure of welded metal is ferritepearlite one, rather homogeneous and dispersed, which is typical for cast metal in a water-cooled
mold. Impact tests of hammers obtained using electroslag surfacing were carried out on a specially
designed impact stand, which provides energy-kinematic parameters of hammer impact on a shaking
beam similar to an industrial electrostatic precipitator. The tests have shown their high reliability
(there was no damage) and thus confirmed the possibility of their industrial use. The calculated expected economic effect from the use of electroslag surfacing technology in the manufacture of hammers of the percussion shaking mechanism relative to the developed design of the hammer was about
350–400 UAH per piece. The results obtained in the work can be used in production, in the design of
technological processes for the manufacture of parts with a complex manufacturing process2020-01-01T00:00:00ZМоделювання поведінки стрижня з трилінійного двофазного матеріалу з урахуванням температури
https://er.chdtu.edu.ua/handle/ChSTU/1894
Title: Моделювання поведінки стрижня з трилінійного двофазного матеріалу з урахуванням температури
Authors: Стеблянко, П. О.; Дьомічев, К. Е.; Петров, О. Д.
Abstract: В роботі сформульовано феноменологічну модель для опису властивостей сплавів із
пам’яттю форм та пам’яттю в точці зміни температури. Встановлено, що класичні матеріальні діаграми – це конверт певного сімейства матеріальних діаграм, побудований за певними
законами зміни швидкості та розриву фронту деформації. Для використання феноменологічної моделі з метою дослідження двофазних матеріалів з різними модулями пружності
розв’язано додаткову задачу, яка пов’язана з розбудовою миттєвої термомеханічної поверхні.
В роботі проведено числове дослідження, як результат показано типову залежність для швидкості розповсюдження фазового переходу від часу. Графік залежності має три ділянки.
На першій ділянці швидкість дорівнює нулю, а на третій – досягає постійного значення. Між
ними міститься ділянка зі змінною швидкістю. В результаті обчислення дотичного модуля
на кожному кроці інтегрування за часом інтегральна діаграма матеріалу, побудована в роботі, теж має три характерні ділянки.; In the conditions of modern scientific and technological progress in various fields of science
and technology an increasing number of new materials find application. The growth of production of
pseudo-elastic-plastic materials or materials with shape memory which have phase transitions and
their wide application necessitate the creation of new mathematical and computer models and calculation methods taking into account real technological loads and material properties. To simulate the
behavior of structural elements made of such materials it is necessary to determine the unsteady thermomechanical state not only at the pseudo-elastic stage of deformation, but also beyond the elastic
limit at significant plastic deformations. In order to construct physical relations between the stress
and strain, it is necessary to know the position of the phase transition front and the kinetic response
function. Such a problem is relevant for mathematical and computer simulation of materials having
phase transitions with regard to temperature.
The paper formulates a nonlinear phenomenological model for describing the properties of alloys with memory at the material point and during temperature changes. It has been established that
classical material diagrams are a curve enveloping a certain family of material diagrams constructed
according to certain laws of changes in the rate and discontinuity of the deformation front. In order to
use the phenomenological model to investigate two-phase materials with different elastic moduli, an
additional problem related to the development of the instantaneous thermomechanical surface is introduced. A numerical study has been carried out in the work, as a result of which a typical dependence for the phase transition propagation velocity in time has been obtained. The graph of the dependence of the phase transition propagation velocity on time has three sections. On the first section
the speed is zero, and on the third it reaches a constant value. Between them there is a section with a
variable velocity. As a result of calculating the tangential modulus at each time integration step, the
integral material diagram constructed in the work also has three characteristic sections. The phenomenological model obtained in the paper can be used for mathematical and computer modeling of functional materials2020-01-01T00:00:00ZЗакономірності впливу технологічних параметрів та зовнішніх чинників на температуру та склад продуктів згоряння піротехнічних нітратно-металевих сумішей
https://er.chdtu.edu.ua/handle/ChSTU/1893
Title: Закономірності впливу технологічних параметрів та зовнішніх чинників на температуру та склад продуктів згоряння піротехнічних нітратно-металевих сумішей
Authors: Мотрічук, Роман Борисович; Кириченко, Оксана В'ячеславівна; Ващенко, Вячеслав Андрійович; Колінько, Сергій Олександрович; Бутенко, Тетяна Іванівна; Кириченко, Є.П.; Цибулін, Валентин Вікторович
Abstract: Представлено результати термодинамічних розрахунків залежностей температури
та складу продуктів згоряння піротехнічних сумішей з порошків магнію та нітрату калію від
коефіцієнта надлишку окиснювача α = 0,1…3,0, величини органічної добавки = 5…20 % і зовнішнього тиску Р = 105
…3107 Па, що визначають вибухонебезпечні режими їх згоряння. Дослідження проводилися за допомогою методів термодинамічного аналізу процесів горіння сумішей з урахуванням фазової нерівноважності їх продуктів згоряння. За даними термодинамічного
розрахунку температура продуктів згоряння істотно залежить від коефіцієнта надлишку
окиснювача в суміші та тиску і має максимум. З даних термодинамічних розрахунків температури продуктів згоряння сумішей магній + нітрат калію + парафін, стеарин, нафталін,
антрацен випливає, що введення добавок розглядуваних органічних речовин у суміш магнію
з нітратом натрію не призводить до істотної зміни загального характеру залежності температури продуктів згоряння від коефіцієнта надлишку окиснювача і тиску для подвійної
суміші.; Methods for calculating the temperature and composition of combustion products of mixtures
of magnesium and potassium nitrate powders, which are widely used in the equipment of various pyrotechnic articles (lighting, signaling, tracing, etc.), are currently absent. The aim of this work is to determine the use of thermodynamic methods to calculate the dependences of the temperature and composition of combustion products of pyrotechnic mixtures of magnesium and potassium nitrate powders
on the ratio of components and external pressure. The results of thermodynamic calculations of the
dependences of the temperature and composition of combustion products of pyrotechnic mixtures of
magnesium and potassium nitrate powders on the coefficient of excess oxidant α = 0,1…3,0, the value
of organic additive = 5…20 % and external pressure P = 105
… 3107 Pa, which determine the explosive modes of their combustion, are obtained. The research has been carried out using the methods
of thermodynamic analysis of combustion processes of mixtures taking into account the phase imbalance of their combustion products. According to the thermodynamic calculation, the temperature of
the combustion products significantly depends on the coefficient of excess oxidant in the mixture and
pressure and has a maximum. From the data of thermodynamic calculations of the temperature of
combustion products of mixtures of magnesium + potassium nitrate + paraffin, stearin, naphthalene,
anthracene it follows that the introduction of additives of organic matter into the mixture of magnesium with sodium nitrate does not significantly change the overall temperature of combustion products,
pressure for double mixture. The analysis of the results of calculations shows that regardless of the
nature of the additive, the curve Tс(α), as in the case of a double mixture, at different pressures has
a maximum. When adding paraffin, naphthalene and anthracene to the mixture, the value of Tс at
α = 0,1, in contrast to the double mixture and the mixture with the addition of stearin, is greater than
at α = 6,0. The introduction of the addition of stearin into the mixture, regardless of the coefficient of
excess oxidant and pressure, leads to a significant reduction in Tс. The introduction of the same additives of paraffin, naphthalene and anthracene in the mixture leads to a significant decrease in Tс, regardless of α only in the region of low pressure, in the region of high pressure for large α (α > 5,0), on
the contrary, increasing the addition of these substances leads to an increase in Tс. When adding stearin, naphthalene and anthracene additives to the mixture, the position of the maximum Tсmax is shifted
towards the excess of oxidant, which is not observed when adding paraffin to the mixture2020-01-01T00:00:00Z