Please use this identifier to cite or link to this item: https://er.chdtu.edu.ua/handle/ChSTU/2221
Title: Флотоекстракція барвника активного яскраво-червоного 5 СХ з водних розчинів
Other Titles: The solvent sublation of Reactive Red 2 from water solutions
Authors: Толстопалова, Наталія Михайлівна
Обушенко, Тетяна Іванівна
Баранюк, Надія Віталіївна
Keywords: флотоекстракція;полютант;активний яскраво-червоний 5СХ;поверхнево-активна речовина (ПАР);ступінь видалення;solvent sublation;pollutant;Reactive Red 2;surfactant;dye removal degree
Issue Date: 2019
Publisher: Вісник Черкаського державного технологічного університету. Технічні науки
Abstract: В роботі досліджено вилучення з водного розчину аніонного барвника активного яскравочервоного 5СХ методом флотоекстракції. Вихідна концентрація барвника – 10 мг/дм3. Як поверхнево-активну речовину для утворення малорозчинної гідрофобної сполуки – сублату – було використано гексадецилтриметиламоній бромід. Органічна фаза – ізоаміловий спирт. Експериментально досліджено вплив деяких параметрів на ступінь видалення барвника: тривалість процесу, рН водної фази, молярне співвідношення барвник:ПАР; розмір бульбашок газу. Згідно з отриманими результатами найвищий ступінь видалення активного яскраво-червоного 5 СХ становить 96 % при тривалості процесу 10 хв, рН 6, молярному співвідношенні барвник:ПАР = 1:2 та розмірі бульбашок газу 40 мкм. Результати експерименту є підтвердженням, що флотоекстракція є перспективним методом для ефективного очищення стічних вод від барвників.
Presented work has researched the removal of Reactive Red 2 from water solution by solvent sublation. Solvent sublation is an innovative technology, which is an improved version of ion flotation, the use of which does not form foam. The implementation of this method of wastewater treatment provides for the simultaneous separation of the aqueous phase and the pollutant, followed by concentration of the pollutant. This process allows to remove both inorganic and organic pollutants from the aquatic environment. Reactive Red 2 is an anionic dye and widely used for printing and dyeing cellulose fibers, silk and wool. The dye is toxic and carcinogenic. Wastewater contaminated with this dye must be cleaned to eliminate the negative impact on the environment. The process of removing Reactive Red 2 is carried out with the following operating parameters: column diameter – 3.5 cm; gas – nitrogen; gas consumption – 60 ÷ 75 cm3 /min; the volume of the aqueous phase – 200 cm3 ; the volume of the organic phase – 10 cm3 ; initial dye concentration – 10 mg/dm3 . Hexadecyltrimethylammonium bromide is selected as a surfactant to form a poorly soluble hydrophobic compound. The organic phase is isoamyl alcohol. The effect of some parameters on the degree of dye removal has been experimentally studied: process duration, pH of the aqueous phase, molar ratio dye:surfactant, gas bubble size. According to the results, the highest degree of Reactive Red 2 removal is 96 % with a process duration of 10 minutes, pH – 6, molar ratio dye:surfactant = 1:2, and gas bubble size – 40 μm. The experimental results confirm that the proposed solvent sublation technology guarantees a sufficient level of wastewater treatment from anionic dyes. The selected method can be used in local wastewater treatment systems with subsequent return of water to the process. This solution is economically viable and will significantly reduce the level of pollution of natural reservoirs with dyes
URI: https://er.chdtu.edu.ua/handle/ChSTU/2221
ISSN: 2306-4412
2306-4455
DOI: 10.24025/2306-4412.3.2019.178304
Issue: 3
First Page: 138
End Page: 144
Appears in Collections:№3/2019

Files in This Item:
File Description SizeFormat 
19.pdfТолстопалова338.16 kBAdobe PDFThumbnail
View/Open
зміст.pdf380.72 kBAdobe PDFThumbnail
View/Open
титул.pdf337.08 kBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.