Please use this identifier to cite or link to this item: https://er.chdtu.edu.ua/handle/ChSTU/2521
Full metadata record
DC FieldValueLanguage
dc.contributor.authorПлахотний, Олександр Петрович-
dc.date.accessioned2021-07-20T12:11:07Z-
dc.date.available2021-07-20T12:11:07Z-
dc.date.issued2018-
dc.identifier.issn2306-4412-
dc.identifier.issn2306-4455-
dc.identifier.urihttps://er.chdtu.edu.ua/handle/ChSTU/2521-
dc.description.abstractКомбінована технологія послідовного використання електроерозійної обробки та електрохімічної обробки дротяним електродом дозволяє структурувати поверхню і формувати металеві компоненти з високою точністю, незалежно від міцності та твердості матеріалів. У межах цього дослідження усуваються деякі проблеми, які можуть обмежувати подальший розвиток запропонованої технології. Проста тривимірна модель за методом кінцевих елементів використовується для розрахунку розподілу первинного струму на поверхні аноду. Тривимірні результати порівнюються з даними двовимірного аналітичного моделювання. Це дозволяє перевірити точність алгоритму. В результаті проведених розрахунків встановлено, що катод з ізоляційним шаром, нанесеним на бічну стінку, може поліпшити локалізацію і точність обробки.uk_UA
dc.description.abstractCombined technology for the sequential use of electroerosive treatment and electrochemical machining with a wire electrode allows the surface to be structured and the metal components to be fused with high accuracy, regardless of the strength and hardness of materials. Within the scope of this study, some issues which may limit the further development of the proposed technology are eliminated. A simple three-dimensional model by the finite element method is used to calculate the distribution of primary current on the surface of the anode. Three-dimensional results are compared with the data of two-dimensional analytical modeling. This allows to check the accuracy of the algorithm. As a result of the calculations, it is established that a cathode with an insulating layer applied to the side wall can improve the localization and accuracy of the treatment.uk_UA
dc.language.isoukuk_UA
dc.publisherВісник Черкаського державного технологічного університету. Серія: Технічні наукиuk_UA
dc.subjectелектроерозійна вирізна обробкаuk_UA
dc.subjectелектрохімічна обробкаuk_UA
dc.subjectдротяний електрод-інструментuk_UA
dc.subjectкомп’ютерне моделюванняuk_UA
dc.subjectelectro-erosive treatmentuk_UA
dc.subjectelectrochemical machininguk_UA
dc.subjectwire electrode-tooluk_UA
dc.subjectcomputer modelinguk_UA
dc.titleПідвищення точності розмірної електрохімічної обробки дротяним електродом на основі моделювання тривимірних електростатичних полівuk_UA
dc.title.alternativeEnhancement of accuracy of dimensional electrochemical processing by a wire electrode on the basis of three-dimensional electrostatic field modelinguk_UA
dc.typeArticleuk_UA
dc.citation.issue1uk_UA
dc.citation.spage60uk_UA
dc.citation.epage66uk_UA
dc.identifier.doi10.24025/2306-4412.1.2018.153275-
Appears in Collections:№1/2018

Files in This Item:
File Description SizeFormat 
11.pdfПлахотний375.56 kBAdobe PDFThumbnail
View/Open
зміст.pdf81.54 kBAdobe PDFThumbnail
View/Open
титул.pdf87.31 kBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.