Please use this identifier to cite or link to this item: https://er.chdtu.edu.ua/handle/ChSTU/749
Title: Оцінка адекватності критеріїв локалізації процесу анодного розчинення при використанні циліндричних дротяних електродів
Other Titles: Evaluation criteria adequacy of process localization of anodic dissolution using wire cylindrical electrodes
Authors: Тімченко, Олексій Володимирович
Осипенко, Василь Іванович
Плахотний, Олександр Петрович
Keywords: електрохімічна обробка;дротяний електрод;міжелектродний проміжок;коефіцієнт локалізації електрохімічного розчинення
Issue Date: 2016
Publisher: Вісник Черкаського державного технологічного університету. Серія: Технічні науки
Abstract: Стаття присвячена розробці науково обґрунтованих методів оцінювання локалізації процесу анодного розчинення в електрохімічній комірці з циліндричним електродом. Проведено аналіз можливості застосування відомих підходів до оцінювання локалізації процесу анодного розчинення для електрохімічної комірки з циліндричним електродом. На основі комплексу експериментальних і теоретичних досліджень запропоновано, обґрунтовано та розроблено методику визначення рівня локалізації процесу електрохімічного розчинення середньовуглецевих сталей при використанні схеми обробки з циліндричними дротяними електродами та коаксіальною вертикальною верхньою подачею електроліту. Запропоновано нові критерії визначення рівня локалізації процесу, які з необхідним ступенем адекватності дозволяють оцінити вплив на локалізацію властивостей електроліту та амплітудно-часових параметрів джерела живлення.
For a significant expand of technological capabilities of electrical wire cut for the purpose of obtaining high-performance surfaces with roughness parameters up to Ra <0.1 microns and controllable properties of surface layers the development of combined treatment methods based on different mechanisms of workpiece material destruction is required. Considering technical and technological features of electrical wire cutting the method of wire electrode electrochemical machining (WEECM) has been recognized with sufficient justification to be the most effective method of finishing. The main problem of new hybrid technology consists in very limited data on physical and chemical laws of electrochemical machining process using wire electrode, which would allow to adapt it for efficient use in electrical wire cut without compromising high-end precision machining (± 0,005 mm). It is particularly important when parts have intricate shapes and, unlike traditional ECM, need to be machined with high accuracy. Only WECM provides an opportunity to localize technological process and thus provide a relatively small area for spreading of current, which practically defines the process control and its final results. This work is devoted to the problem of creating scientifically based methods for assessing the process of anodic dissolution localization in electrochemical cell with a cylindrical wire electrode.
URI: http://er.chdtu.edu.ua/handle/ChSTU/749
ISSN: 2306-4455
Volume: 2
First Page: 84
End Page: 91
Appears in Collections:Наукові публікації викладачів (ФКТМД)

Files in This Item:
File Description SizeFormat 
84-91_Осипенко Плахотний Тімченко.pdfЛокалізація електрохімічного розчинення402.47 kBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.