Please use this identifier to cite or link to this item: https://er.chdtu.edu.ua/handle/ChSTU/4886
Title: Features of application in critical structures of products made by fused deposition using 3D printing technology
Other Titles: Особливості застосування у критичних конструкціях виробів, виготовлених методом осадження плавленням за технологією 3D-друку
Authors: Tychkov, Dmytro
Bondarenko, Yuliia
Tuz, Vyacheslav
Sapozhnikov, Serafym
Shapovalova, Daria
Туз, Вячеслав Валерійович
Keywords: additive technology;print quality;strength;endurance;адитивна технологія;якість друку;міцність;витривалість
Issue Date: 2023
Publisher: Вісник Черкаського державного технологічного університету. Технічні науки
Abstract: The technology of hot-melt 3D printing has prospects for military equipment and other special applications, provided that necessary requirements for the quality, strength and durability of plastic components are met. However, there is a problem of insufficient accuracy and unexplored patterns of change in technological parameters during 3D printing, which makes it necessary to manufacture critical structures using plasma deposition technology. The main purpose of the article is to study and evaluate the features of using the fused deposition method in 3D printing technology for the manufacture of products that are critical special-purpose structures and require increased strength and durability. To achieve this purpose, the technology and means of 3D printing by fused deposition method (filament feed control system with a circular encoder) have been improved. It has been established that the use of the filament feed control system can reduce the number of visually detected defects on the surface of printed products by an average of 71.7%, but increase the amount of wire consumed by 13% and the average printing time by 15-17%, which is due to the lack of supporting structures for the resulting surfaces. The research conducted in this paper has shown an increase in delamination strength of elements of critical structures, such as brackets for mounting a laser rangefinder to the body of an unmanned aerial vehicle. With the help of the filament feed control system, the strength of these elements has increased from 27.4 (tensile) and 32.1 (compressive) to 38 (tensile) and 44.3 MPa (compressive). There is also a more than 2.7-fold increase in the number of dynamic load cycles during endurance tests. This study indicates greater dynamic stability and less fatigue of the elements manufactured by fused 3D printing using a filament feed control system. The results will have practical applications in various fields, including military applications.
Технологія термоплавкого 3D-друку має перспективи для військової техніки та інших спеціальних застосувань за умови дотримання необхідних вимог до якості, міцності та довговічності пластикових деталей. Однак існує проблема недостатньої точності та недосліджених закономірностей зміни технологічних параметрів під час 3D-друку, що зумовлює необхідність виготовлення відповідальних конструкцій з використанням технології плазмового осадження. Основною метою статті є вивчення та оцінка особливостей використання методу осадження плавленням в технології 3D-друку для виготовлення виробів, які відносяться до відповідальних конструкцій спеціального призначення і вимагають підвищеної міцності та довговічності. Для досягнення поставленої мети було вдосконалено технологію та засоби 3D-друку методом плавкого осадження (система контролю подачі філаменту з круговим енкодером). Встановлено, що використання системи контролю подачі філаменту дозволяє зменшити кількість візуально виявлених дефектів на поверхні надрукованих виробів в середньому на 71,7%, але збільшити кількість витраченого дроту на 13 % і середній час друку на 15-17 %, що пов'язано з відсутністю опорних конструкцій для одержуваних поверхонь. Дослідження, проведені в даній роботі, показали підвищення міцності на розшарування елементів відповідальних конструкцій, таких як кронштейни для кріплення лазерного далекоміра до корпуса безпілотного літального апарату. За допомогою системи керування подачі філаменту міцність цих елементів зросла з 27,4 МПа (при розтягуванні) і 32,1 МПа (при стисненні) до 38 МПа (при розтягуванні) і 44,3 МПа (при стисненні). Також більш ніж у 2,7 рази збільшилася кількість циклів динамічного навантаження під час випробувань на витривалість. Це дослідження свідчить про більшу динамічну стійкість і меншу втому елементів, виготовлених методом термоплавкого 3D-друку з використанням системи керування подачі нитки. Результати матимуть практичне застосування в різних галузях, в тому числі у військовій сфері.
URI: https://er.chdtu.edu.ua/handle/ChSTU/4886
ISSN: 2306-4412 (print)
2708-6070 (online)
DOI: 10.62660/2306-4412.4.2023.50-58
Volume: 28
Issue: 4
First Page: 50
End Page: 58
Appears in Collections:том 28, №4/2023

Files in This Item:
File Description SizeFormat 
7.pdf1.1 MBAdobe PDFThumbnail
View/Open
зміст.pdf144.6 kBAdobe PDFThumbnail
View/Open
титул.pdf216.63 kBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.