Please use this identifier to cite or link to this item: https://er.chdtu.edu.ua/handle/ChSTU/722
Title: Підвищення стійкості оптичних елементів оптико-електронних приладів до зовнішніх термічних впливів
Other Titles: Enhancing the stability of optical elements of optical-electronic devices to external thermal effects
Authors: Яценко, Ірина В'ячеславівна
Ващенко, Вячеслав Андрійович
Цибулін, Валентин Вікторович
Keywords: оптико-електронне приладобудування;оптична кераміка;електронний промінь;мікроструктура;твердість;термопружні напруження;optoelectronic instrumentation;optical ceramics;electron beam;microstructure;hardness;thermo-elastic tensions
Issue Date: 2018
Publisher: Вісник Черкаського державного технологічного університету. Серія: Технічні науки
Abstract: В результаті проведених експериментальних досліджень встановлено, що після поперед-ньої обробки робочих поверхонь елементів з оптичних керамік рухомим електронним променем для діапазонів зміни його параметрів (густини теплового впливу та швидкості його переміщення) підвищується мікротвердість поверхні у 1,5…1,7 рази; у поверхневих шарах товщиною 40…60 мкм виникають стискачі термопружні напруження величиною 25…90 МПа, які призводять до утворення зміцнених шарів товщиною до 210…230 мкм. Отримано, що покращення властивостей поверхневих шарів оптичних елементів після їх електронно-променевої обробки призводить до підвищення стійкості елементів до зовнішніх термовпливів: збільшуються у 2…4 рази критичні значення зовнішніх теплових потоків та тривалості їх дії, які призводять до руйнування елементів; при цьому збільшення зовнішнього тиску знижує вказані критичні значення параметрів у 1,3…1,7 рази; підвищуються у 1,8…2,7 рази значення гранично допустимих термопружних напружень у оптичних елементах, оброблених електронним променем, для діапазонів зміни температур нагріву 300…1200 К.
The purpose of the work is to prevent the destruction of elements from optical ceramics of devices by improving the properties of the surface layers of the elements and increasing their resistance to external thermo-influences by means of preliminary electron beam processing. As a result of conducted experimental researches it was established that after preliminary processing of working surfaces of elements from optical ceramics by a moving electronic beam for ranges of changes of its parameters (density of thermal influence Fn = 106 …1,6·107 W/m 2 and the speed of its movement V = 10-3 …10-1 m/s) the microhardness of the surface rises in 1,5 ... 1,7 times; in the surface layers of 40 ... 60 μm thickness, compressive thermosetting voltages are formed in magnitude 25…90 MPa, which lead to the formation of reinforced layers in the thickness up to 210 ... 230 microns. It was obtained that the improvement of the properties of the surface layers of optical elements after their electron beam processing leads to an increase in the stability of the elements to external thermo-influences: the critical values of the external heat fluxes and the time of their actions, which lead to the destruction of the elements, are increased in 2 ... 4 times; while increasing the external pressure from 105 Pa to 107 Pa reduces the indicated critical values of parameters in 1,3 ... 1,7 times; the value of the maximum allowable thermo-elastic tensions in optical elements processed by an electron beam is increased in 1,8 ... 2,7 times, for the ranges of temperature changes of heating 300 ... 1200 K
URI: http://er.chdtu.edu.ua/handle/ChSTU/722
ISSN: 2306-4412
2306-4455
DOI: 10.24025/2306-4412.2.2018.162163
Issue: 2
First Page: 45
End Page: 52
Appears in Collections:№2/2018

Files in This Item:
File Description SizeFormat 
45-52_Яценко.pdf333.56 kBAdobe PDFThumbnail
View/Open
зміст.pdf170.57 kBAdobe PDFThumbnail
View/Open
титул.pdf722.79 kBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.